Xiaomi 17 BM6D Battery: 6330mAh Specs & Replacement Guide
Xiaomi 17 BM6D Battery: 6330mAh Specs & Replacement Guide
The Xiaomi 17 BM6D battery shown in this teardown is a 6330mAh typical-capacity assembly. For repair shops and wholesale buyers, matching the regional handset and the original battery label is more useful than ordering by the Xiaomi 17 family name alone. This guide covers the global-capacity version visible in the source video, with actual front, reverse and installed views.
BM6D battery specifications from the label
The removed battery exposes the BM6D model line. The installed close-up provides a clearer upright view of its electrical ratings. Xiaomi's official global Xiaomi 17 specifications independently list 6330mAh typical capacity.
| Item | Observed label value |
|---|---|
| Battery model | BM6D |
| Typical capacity | 6330mAh |
| Rated capacity | 6160mAh |
| Nominal voltage | 3.81Vdc |
| Charging voltage limit | 4.55Vdc |
| Nominal energy | 23.47Wh |
| Typical energy | 24.12Wh |
Typical and rated capacities describe different label values; a 6330mAh marketing specification should not be substituted for the 6160mAh rated figure. The energy figures are consistent with capacity multiplied by nominal voltage: 6.16Ah x 3.81V is approximately 23.47Wh, while 6.33Ah x 3.81V is approximately 24.12Wh. The 4.55V charging limit is distinct from the 3.81V nominal rating.
Figure 1. BM6D label side lifted above the chassis at 06:58. The original camera orientation is retained; the label is upside down and gloves partly cover the outer edges. Open the native 4K image to inspect the model line. Source: Trofim Viorel teardown, native 3840 x 2160.Genuine rear view and assembly identification
The rear image shows two physical pouch sections within the removed battery assembly. The capacity and energy table above describes the labeled assembly. Do not double those assembly figures because two sections are visible, or infer the electrical arrangement from the number of connector tails. Cell markings and assembly ratings need to be interpreted at their respective levels.
Compare the complete outline, insulation, flex positions and connector geometry with the original part before accepting a BM6D replacement battery. A similar appearance or shared brand name does not establish compatibility.
Figure 2. Genuine battery reverse at 07:03.5, held above the chassis. Two pouch sections are visible; gloves cover part of their edges. This is the battery itself, not the adhesive carrier left in the phone. Source: Trofim Viorel teardown, native 3840 x 2160.Check the Xiaomi 17 regional version before ordering
Xiaomi's global specification is 6330mAh. The 91mobiles Xiaomi 17 review also distinguishes its 6330mAh Indian unit from the 7000mAh Chinese version. This article does not establish interchangeability between those versions or with Xiaomi 17 Pro, 17 Pro Max, 17T or 17T Pro batteries.
Record the handset model and sales region, photograph the original battery label, and compare the physical assembly with a supplier's actual sample. Resolve a different model code or capacity before placing a bulk order.
Figure 3. Installed battery and surrounding chassis at 06:00. Capacity, voltage and energy values are visible; the orange removal film partly covers the model line, which is exposed in Figure 1. Source: Trofim Viorel teardown, native 3840 x 2160.Battery-life test and charging context
Dhruv Joshi's 91mobiles review, published March 24, 2026, reports 16.5 hours in PCMark for the 6330mAh Indian Xiaomi 17. Its stated battery-test interval runs from 100% to 20% charge. The cited battery section does not specify brightness. This is a whole-phone benchmark result under that review's conditions, rather than a prediction of everyday use or a guarantee for a replacement battery.
Xiaomi lists 100W wired HyperCharge and 50W wireless HyperCharge for the global handset. Those are phone specifications; they do not establish the performance or suitability of an untested replacement assembly. Use the applicable service process and verify charging operation after installation.
Replacement and wholesale sourcing checks
Before installation, compare label ratings, dimensions, connector positions and insulation against the removed original. Follow an appropriate service procedure, disconnect power before handling internal connectors, and avoid bending or puncturing the pouches. Check battery detection, charging and abnormal heating after a correctly matched replacement is fitted.
Repair shops and distributors can browse our Xiaomi battery category and mobile battery product center. For a Xiaomi 17 BM6D battery inquiry, send the handset region, readable original-label photos, connector and outline photos, requested quantity and destination through our inquiry page. Ask for current product details, sample matching and a quotation before committing to a purchase.
Image source: Trofim Viorel, Xiaomi 17 Disassembly Process | Full Teardown & Internal Components. All three images are genuine frames from the native 3840 x 2160 video; no label text has been replaced or invented.